Rollerski Parts
Fischer Rollerski Brake
99,95 € 95,95 €Swenor Alutech Fender 4-Pack
15,95 € 13,95 €Fischer Splash Guards
4,95 € 2,95 €
Longway One Piece Aluminium Roller Ski Fork
11,95 €
Skigo Replacement Fenders 2-Pack
11,95 €
Marwe 7A Mudguard Screw
0,75 €
Bronson G2 Bearings 8-Pack
22,95 € 21,95 €
Swenor Finstep Fork
14,95 €
Swenor Finstep Frame
54,95 €
Bronson G3 Pro Bearings 8-Pack
38,95 € 37,95 €
Bronson G3 Bearings 8-Pack
38,95 € 34,95 €
Supreme Abec 5 Bearing
1,95 €
Marwe 3 Fork Plate Bolt
0,95 €
Swenor Carbonfibre Frame
54,95 €
Marwe 15C Axle Bolt For 100/105x40mm Wheels
2,95 €
Supreme Abec 7 Bearing
2,45 €
Marwe 3C Fork Plate Bolt
0,95 €
Longway Roller Ski Tip File
11,95 €
Swenor Finstep Front Wheel Bolt
0,95 €
Marwe 17 Ratchet Wheel Needle Bearing
34,95 €
Swenor Finstep Front Shaft
9,95 €
Marwe 7 Mudguard Screw
0,75 €
Swenor Tristar/Touring Wheel Bolt And Nut Set
2,95 €
Swenor Tristar/Touring Rear Shaft
15,95 €
Marwe 2L/2M Fork Plate For Roller skis
9,95 €
Swenor Carbonfibre Rear Shaft
15,95 € 13,95 €
Bronson Ceramic Bearings 8-Pack
88,95 €
Marwe 2N/2O Fork Plate For Roller skis
10,95 €
Swenor Fibreglass Front Shaft
9,95 €
Swenor Skate/Equipe/Alutech Bolt
2,95 €
Marwe 13B Axle For 80x40mm Free-rotating Wheel
4,95 €
Vauhti Classic Wide 750 Roller Ski Fender
7,95 €
Marwe 2P/2Q Fork Plate For Roller skis
10,95 €
Wicked SUS Rustproof 608 Bearings 4-Pack
17,95 €
Swenor Finstep Rear Shaft
11,95 €
Swenor Carbonfibre Front Wheel Bolt
2,95 €
Marwe 15B Axle Bolt For 100x40mm Wheels
2,95 €Binding mounting - Cross country / Roller skis
37,95 €Rollerski equipment and rollerski parts to keep you rolling
Like every other vehicle for transportation, a set of rollerskis also needs some maintenance. Even if you take good care of your rollerski equipment, you will at some point need to replace some of the rollerski parts. One of the first things that might need a replacement is the bearings. Most skates, skateboards and stunt scooters use the same bearings, but the bearings for rollerskis is usually a bit bigger. Another big difference on the rear wheel is the needle bearing that might also have to be replaced.
Besides the bearings, this category holds every part needed to keep your rollerskis rolling, but we always recommend that you use a little time after each session to clean your rollerskis and lubricate the moving parts of the wheel setup. This will both give you a smoother ride, but it will also expand the lifetime and durability of the rollerski parts - postponing a replacement, saving you some money in the long run.
Some need to use rollerski brakes
There are several different roller ski brakes on the market, and not all rollerskiers even use a braking system, since there are various other ways of bringing your rollerskis to a full stop. For beginners, we always recommend a rollerski brake system, since there's a lot of other technical aspects of rollerskiing that you want to focus on learning in the beginning of your rollerski “career”.