Surfskate Bearings
Bronson G3 Bearings 8-Pack
38,95 € 34,95 €Speed Demons Bearings 8-Pack
14,95 €Bones Reds Bearings 8-Pack
24,95 €Bones Race Reds Bearings 8-Pack
44,95 €
Mosaic Titanium Abec 7 Bearings 8-pack
29,95 €
Hydroponic Hy Bearings
15,95 €
Pig Bearings 8-Pack
26,95 € 24,95 €
Bronson G2 Bearings 8-Pack
22,95 €
Mosaic Abec 7 Bearings 8-pack
20,95 € 12,95 €
Bronson G3 Pro Bearings 8-Pack
38,95 € 37,95 €
Sk8mafia Abec 7 Bearings 8-Pack
20,95 € 16,95 €
Bones Reds Big Balls Bearings 8-Pack
29,95 €
Bones Super Reds Bearings 8-pack
39,95 €
Enuff Skateboard Wheel Spacer 8mm
0,95 €
Andale Carlos Ribeiro Pro Bearings 8-Pack
34,95 € 28,95 €
Jart Abec Bearings 8-pack
17,95 € 14,95 €
Andale Swiss X Diamond Bearings 8-Pack
59,95 €
Bronson Raw Bearings 8-Pack
48,95 €
Hydroponic Hy Bearings incl. Spacers
23,95 €
Andale Swiss Tin Box Bearings 8-Pack
54,95 € 38,95 €
Bones Reds Bearing
2,95 €
Essentials Bearings 8-Pack
14,95 €
Blood Orange Abec 7 Bearings 8-pack
16,95 €
KFD Eight Balls Bearings
14,95 €
Mosaic Abec 5 Bearings 8-pack
15,95 €
Andale Abec 7 Bearings 8-Pack
24,95 € 22,95 €
Enjoi 7-Teenish Bearings 8-Pack
19,95 €
Andale Swiss Tin Box Bearings
64,95 €
Andale Blues Bearings 8-Pack
23,95 € 18,95 €
Primitive Skateboard Bearings 8-Pack
25,95 € 22,95 €
Bronson Ceramic Bearings 8-Pack
88,95 €Surf the Streets Smoothly With Surfskate Bearings
A good set of bearings is key to having a smooth riding experience when out on your surfskate. Most bearings are measured on the ABEC scale, which assesses for precision and accuracy of the bearing. The ABEC scale is measured from 1 to 9, with the higher the number, the greater the degree of precision. Bearings are typically made from steel or ceramics.
How Do You Clean Surfskate Bearings?
First, use your skate tool to remove the wheels from the trucks and then take the bearings out of the wheels. Once you have done this, you’ll now need to remove the rubber shields using a sharp edge like a knife.
Now, place the bearings in either a jar or a specific bearing cleaner that contains the alcohol or acetone solution. Then, shake the jar for around 10 seconds or until you can see the solution getting dirty. Next, remove the bearings and let them dry. To check that they are clean, give them a spin. Spinning smoothly? Finally, you need to lubricate them with some bearing oil. You are now ready to put your setup back together and get riding.
To make sure that you’ve got the right tools to clean your bearings, head over to our Surfskate Tools page.