How to Install Roller skate Bearings

This video demonstrates how to fit bearings into roller skate wheels. Simply have a skate tool ready, and you'll be set!

Procedures for Installing Roller skate Bearings:

Firstly, use a skate tool to unscrew the nut from the axle.
Place 2 bearings onto the axle.
Position the wheel onto the axle ensuring the outer side is facing down. Apply pressure with both hands to insert the initial bearing into the wheel.
Take the wheel off and place the spacer on the axle.
Then, invert the wheel and push downwards again to seat the second bearing properly.

Your bearings are all set!

Frequently Asked Questions:

Is it possible to use skateboard bearings on roller skates?

Indeed, skateboard bearings are suitable for roller skates. Just ensure the wheel axles of your roller skates measure 8 mm in diameter!

What is the method for removing bearings from roller skate wheels?

A bearing remover tool or the roller skate's wheel axle can be utilised.

How many bearings are required for roller skates?

A total of 16 bearings are necessary for a pair of roller skates (2 per wheel).

Do roller skates need spacers?

If your roller skate usage involves cruising or dancing and you can adjust the wheels securely without hindering the bearings, spacers are beneficial but not mandatory. Conversely, if you engage in aggressive roller skating or the wheels tend to get jammed when tightened, spacers become essential.