DIN Calculator - Find Your Correct Ski Binding Setting

Use our simple calculator to determine your tailored DIN setting for ski bindings.

Input your weight, height, age, skill level, and boot sole length to receive a precise outcome that enhances safety, guarantees accurate binding release, and boosts confidence on the slopes.

DIN Calculator

Fill in your details below to receive your DIN setting.

1. Boot Sole length:

mm      More info

Use sole length of ski boot in shopping cart

We need the exact measurement of your boots in mm to fit the binding correctly. The number can be found by measuring the length of the outsole (3 digits). The number is also printed on the boot's heel.

2. Skill / style:

First timer / Very cautious

Beginner / Cautious

Intermediate / Recreational

Advanced / Aggressive

Expert / Aggressive Off-piste

3. Body metrics:

Weight:	Please select 10-13 kg / 22-29 lbs 14-17 kg / 30-38 lbs 18-21 kg / 39-47 lbs 22-25 kg / 48-56 lbs 26-30 kg / 57-66 lbs 31-35 kg / 67-78 lbs 36-41 kg / 79-91 lbs 42-48 kg / 92-107 lbs 49-57 kg / 108-125 lbs 58-66 kg / 126-147 lbs 67-78 kg / 148-174 lbs 79-94 kg / 175-209 lbs 95+ kg / 210+ lbs
Height:	Please select 90-148 cm / 2'11"-4'10" 149-157 cm / 4'11"-5'1" 158-166 cm / 5'2"-5'5" 167-178 cm / 5'6"-5'10" 179-194 cm / 5'11"-6'4" 195+ cm / 6'5"+
Age:	Please select 2-9 years 10-49 years 50+ years

DIN value based on your input:

If more info is needed, we will contact you

Purchasing Skis and Bindings at SkatePro

When buying skis and bindings from SkatePro, the DIN calculator will appear at checkout. Input your weight, height, age, skill level, and boot sole length to receive your individual DIN setting.

You have the following options for your bindings:

• Install the bindings yourself
• Have SkatePro install the bindings
• Request a SkatePro expert to contact you for DIN setting verification

Should SkatePro install the bindings, we will adjust them for free according to your DIN result, ensuring your skis are safe for use. Should additional adjustments be necessary, a local ski shop or specialist can easily fine-tune the settings for you.

Understanding a DIN Setting

The DIN value is a standardised measure on ski bindings that determines the ease with which your ski boots will release during a fall. It plays a vital role in balancing safety and performance:

• Low DIN = bindings might release prematurely
• High DIN = bindings might not release during a fall, raising the injury risk

This calculator assists in selecting the correct release force based on your physical measurements and skiing style.

Mechanisms of the DIN Calculator

To determine your DIN number, we consider:

• Weight - additional weight typically necessitates a higher DIN
• Height - affects force during manoeuvres and falls
• Age - younger and older skiers may require adjustments
• Skill Level - settings differ from beginner to expert
• Boot Sole Length - Measured in millimetres from heel to toe

These factors contribute to estimating the proper release setting for your bindings, which is crucial for safety and performance on the slopes.

Frequently Asked Questions

Is it possible to set my own ski bindings?
While this calculator provides your DIN number, installing bindings and final adjustments are best performed by a skilled technician.

Where can I locate my boot sole length?
It's usually found on the bottom or back of the heel of your ski boot, displayed in millimetres. Typically, it involves measuring the outsole's length (3 digits).

Consequences of an incorrect DIN setting?
A setting that's excessively high may not release as needed, while an excessively low setting might release too early. Both scenarios heighten safety risks.