×
MENU
Back |
Rocker Mini BMX

Rocker 3+ Sacriface Freecoaster Mini BMX Bike

EUR 299,95
EUR 439,95 SAVE EUR 140,00
 
(7)
Hot
Zoom
Please select
In stock
Please select
No, thank you
Mini BMX Assembling
Yes, please
Please select
No, thank you
Rocker 12mm Plegs Mini BMX Pegs
12mm - Black
12mm - White/Green
12mm - Black/Silver
12mm - White/Purple
Please select
No, thank you
Rocker Socks
Yes, please
Please select
No, thank you
Rocker Snap Back Cap
Hannibal
Vader
Please select
No, thank you
Rocker RKR Keyring
Yes, please
Add-on items
Mini BMX Assembling
Mini BMX Assembling (1 pcs)
No, thank you
+ EUR 11,95
Rocker 12mm Plegs Mini BMX Pegs
Rocker 12mm Plegs Mini BMX Pegs (1 pair)
No, thank you
EUR 21,95
+ EUR 9,95
Rocker Snap Back Cap
Rocker Snap Back Cap (1 pcs)
No, thank you
EUR 15,95
+ EUR 4,95
1 pcs
Qty.
1 pcs
2 pcs
3 pcs
4 pcs
5 pcs
6 pcs
7 pcs
8 pcs
9 pcs
10+
Qty.
1 pcs
Limited quantity available
  Save for later
From same brand
Description

The Rocker+ edition comes with an improved fork with reduced clearance for much easier foot jams. The frame has been tweaked with an angled seat clamp and micro drop outs for a super clean looking back end.

This Rocker Mini BMX comes in a special Freecoaster version, which makes it to roll backwards whilst keeping the pedals in the same position.

The Rocker3 has been under the knife for a solid 1 kg reduction in weight compared to the Rocker 2. The most serious Rocker Mini BMX to date and also the most durable. Built for higher speed and bigger tricks. Rocker 3 features a drive sprocket with 9 teeth and a 28 teeth front sprocket.

The tall gearing allows for high speeds and thus much higher airs. With higher airs comes higher impacts. Hence the upgraded 3-piece crank which takes far more abuse. A short back end makes spinning a whole lot easier and the addition of the street pro tyres will give you more confidence to throw bigger tricks. Comes with precision sealed wheel bearings for lower rolling resistance.

  • Weight reduced hi tensile steel frame
  • Taper fork & bar
  • Top load stem
  • Thread less forks
  • 10" x 28" bars
  • Plastic BMX pedals with matching kraton rubber grips
  • 28/9 gearing
  • 9T semi sealed driver
  • Precision sealed cartridge bearings
  • 3 piece forged steel cranks
  • Fat padded seat
  • Steel 3 piece wheels with patented Rocker rear wheel hub and 9t driver
  • Pneumatic rubber 10" soft compound chunky tyres
  • Chrome/coloured KMC chain

Notice:

  • This particular model is unfortunately prone to rust issues if left wet after use in moist or wet conditions. Please remember to wipe down all neochrome parts on this bike after use for added lifespan.
  • The bike is delivered 80% assembled. All parts must be tightened before use.
  • When using a freecoaster hub you will find that it takes a while longer before you start gaining momentum when pedalling. This is called "slack" and can be adjusted in 4 different configurations for much slack to very little. All this can be done without removing the wheel.
Specifications
Total height:
70cm
Hub:
Freecoaster, Sealed bearings
Bar height:
10"
Bar width:
28"
Bar material:
Chrome steel
Weight:
23lbs
Frame Top Tube:
12"
Frame standover height:
6.3" (16cm)
Chainstay length (Centre):
8.46" (21.5cm)
Headset type:
Integrated 1 1/8"
Frame material:
Hi-ten steel
Headtube length:
100mm
Gear ratio:
28/9
Axle diameter:
12mm
Stem type/Length:
Top load
Crank Length/Type:
120mm, Three-piece
Crank material:
Steel
Pedal axle diameter:
9/16"
Wheel diameter:
10"
Wheel type:
Air tyre
Seat:
Combo
Seatpost Length:
110mm
Pedal material:
Plastic
Max rider weight:
220lbs
Assembly:
Partly assembled
reviews  
 
(7)

There are no reviews in English. Show reviews in other languages (7 reviews)