×
MENU
Back |
Rocker Mini BMX

Rocker 3+ Doom Freecoaster Mini BMX Bike

EUR 219,95
EUR 269,95 SAVE EUR 50,00
 
(2)
Zoom
Video
In stock (5+ pcs)

Please select

No, thank you
Mini BMX Assembling
Yes, please

Please select

No, thank you
Rocker 12mm Plegs Mini BMX Pegs
12mm - Black/Gold
12mm - White/Green
12mm - Green/Black
12mm - Green/Blue
12mm - Black/Silver
12mm - Black/Red
12mm - White/Blue
12mm - Black/Purple
12mm - Green/Purple
12mm - White/Purple

Please select

No, thank you
Rampage Single Mini Ramp
Yes, please
Add-on items
Rocker 12mm Plegs Mini BMX Pegs
Rocker 12mm Plegs Mini BMX Pegs
1 pair
No, thank you
EUR 21,95
+ EUR 14,95
Rampage Single Mini Ramp
Rampage Single Mini Ramp
1 pcs
No, thank you
EUR 21,95
+ EUR 11,95
Mini BMX Assembling
Mini BMX Assembling
1 pcs
No, thank you
+ EUR 11,95
1 pcs

Qty.

1 pcs
2 pcs
3 pcs
4 pcs
5 pcs
6 pcs
7 pcs
8 pcs
9 pcs
10+
  Save for later
Description

The Rocker+ edition comes with an improved fork with reduced clearance for much easier foot jams. The frame has been tweaked with an angled seat clamp and micro drop outs for a super clean looking back end.

This Rocker Mini BMX comes in a special Freecoaster version, which makes it to roll backwards whilst keeping the pedals in the same position.

The Rocker3 has been under the knife for a solid 1 kg reduction in weight compared to the Rocker 2. The most serious Rocker Mini BMX to date and also the most durable. Built for higher speed and bigger tricks. Rocker 3 features a drive sprocket with 9 teeth and a 28 teeth front sprocket.

The tall gearing allows for high speeds and thus much higher airs. With higher airs comes higher impacts. Hence the upgraded 3-piece crank which takes far more abuse. A short back end makes spinning a whole lot easier and the addition of the street pro tyres will give you more confidence to throw bigger tricks. Comes with precision sealed wheel bearings for lower rolling resistance.

  • Weight reduced hi tensile steel frame
  • Taper fork & bar
  • Top load stem
  • Thread less forks
  • 10" x 28" bars
  • Plastic BMX pedals with matching kraton rubber grips
  • 28/9 gearing
  • 9T semi sealed driver
  • Precision sealed cartridge bearings
  • 3 piece forged steel cranks
  • Fat padded seat
  • Steel 3 piece wheels with patented Rocker rear wheel hub and 9t driver
  • Pneumatic rubber 10" soft compound chunky tyres
  • Chrome/coloured KMC chain

Notice:

  • The bike is delivered 80% assembled. All parts must be tightened before use.
  • When using a freecoaster hub you will find that it takes a while longer before you start gaining momentum when pedalling. This is called "slack" and can be adjusted in 4 different configurations for much slack to very little. All this can be done without removing the wheel.
Specifications
Total height:
70cm
Pegs:
2 pegs included
Hub:
Freecoaster, Sealed bearings
Bar height:
10" (25.4cm)
Bar width:
28" (71.1cm)
Bar material:
Chrome steel
Weight:
10.5kg
Frame Top Tube:
12" (30.5cm)
Frame standover height:
6.3" (16cm)
Chainstay length:
8.46" (21.5cm)
Headset type:
Integrated 1 1/8"
Frame material:
Hi-ten steel
Headtube length:
100mm
Gear ratio:
28/9
Axle diameter:
12mm
Stem type/Length:
Top load
Crank Length/Type:
120mm, Three-piece
Crank material:
Steel
Wheel diameter:
10"
Wheel type:
Air tyre
Seat:
Combo
Seatpost Length:
110mm
Pedal material:
Plastic
Max rider weight:
100kg
Assembly:
Partly assembled
Fits with
reviews  
 
(2)

There are no reviews in English. Show reviews in other languages (2 reviews)